TERMOMIX?真空槳葉干燥機/反應釜-統一干燥

TERMOMIX®真空槳葉干燥機/反應釜的目的是為T(mén)ermomix monoproduction應用程序或批量的生產設備，攪拌機，反應釜，除塵器，烘干機。

支持兩端提供良好的混合特性，與外部互換填料箱或機械密封的攪拌機。

經濟和強大的多用機非常適合于重工業應用。

惰性氣體

濕濾餅或淤漿輸送到干燥器中之前與氮的含氧氣氛中通過控制位移惰化容器內部。此過程可以防止可能形成在容器內的爆炸性氣體環境。

填充

惰性化后完成從一個離心機或吸濾器，或依賴于應用程序漿料送入干燥器的濕濾餅。

當用作反應器中加入所需的固體和液體成分。該反應典型地發生在升高的溫度和壓力。
烘干

為了有效地進行干燥，干燥機通常是抽真空的步驟和在相同的時間加熱。在干燥過程中，產品的攪拌。的干衣機的產品被保持在真空下，在^大允許溫度，直到達到所需的^終產品的濕度水平。
冷卻

干燥完成后的產品被冷卻下來之前排出。
出料

將干燥和冷卻后的產物被排出直通側排出閥。該產品被輸送到排出閥由攪拌器。

TERMOMIX® Paddle Dryer / Reactor

The Termomix® vacuum paddle dryer / reactor is intended for monoproduction applications or bulk production facilities as mixer, reactor, precipitator and dryer.

The agitator is supported on both ends providing excellent mixing characteristics, with externally interchangeable stuffing boxes or mechanical seals.

Economic and robust multipurpose machine well suited for heavy industrial applications.

Inerting

Prior to feeding wet cake or slurry into the dryer the vessel interior is inerted by a controlled displacement of the oxygen containing atmosphere with Nitrogen. This procedure prevents the potential formation of an explosive atmosphere in the vessel interior.

Filling

After inertization is completed wet filter cake from a centrifuge or Nutsche filter, or dependent upon the application slurry is fed into the dryer.

When used as a reactor the required solid and liquid components are added. The reaction typically takes place at elevated temperatures and pressures.
Drying

For efficient drying the dryer is typically evacuated in steps and heated up at the same time. During the drying process the product is agitated. The dryer is maintained under vacuum and at the maximum allowable temperature for the product until the final required product humidity level is reached.
Cooling

After drying is completed the product is cooled down prior to discharging.
Discharging

The dried and cooled product is discharged thru the side discharge valve. The product is transported to the discharge valve by the agitator.

聯系方式：

公司名稱：常州市統一干燥設備有限公司?

聯 系 人：王經理

電      話：13901508015

網      址：http://www.tongyidrying.com

地      址：江蘇省常州市天寧區鄭陸鎮寧河村